View CartMy Account / Order StatusHelp

 
 
 
Payment Processing

ABOUT TRUST ONLINE




(Your shopping cart is empty)

  Home > SWAP / SALE GEAR > Electronics >

  Audio Research Stereo Preamplifier SP6B
  Audio Research Stereo Preamplifier SP6B
Audio Research Stereo Preamplifier SP6B


Bookmark and Share
 
This item was just sent to Audio Research and has been completely refinished from start to finish, it's like new!

List Price: $1,495.00
Our Price: $1,000.00
You save $495.00!


Product Code: AUDSP6B
SOLD

Description
 
Frequency response - High level section: ±.25dB, 5Hz to 30kHz. -3dB points below 1 Hz and above 100kHz Magnetic phono: ±.25dB of RIAA from 30Hz to 40kHz.

Distortion (THD) - Harmonic distortion: Less than .01% at 2V RMS output, 20Hz to 20kHz (typically about .0005% in midband). Intermodulation distortion: Less than .002% at 2V RMS output.

Noise & hum

High level:
(1) 250 µv RMS maximum residual unweighted wide-band noise at main output with gain control minimum (86dB below 5V RMS output).
(2) More than 90dB below 1V RMS input (less than 20 µV equivalent input noise).

  Magnetic phono: 5 µV equivalent input noise, wideband RMS (-66dB reference 10mV input).
Gain Magnetic phono input to tape output, 34dB.
  Magnetic phono input to main output, 60dB.
  High level inputs to tape output, 0dB.
  High level inputs to main output, 26dB.
Input impedance 50 kOhms, all inputs. (Magnetic phono may have any value from 10 ohms to 100 kOhms substituted. Also has provision to add input capacitance for matching certain magnetic cartridges.)  

Output impedance - Less than 500 ohms main output, 1000 ohms tape output. Recommended minimum load for maximum audio quality, 50 kOhms and 250 pF maximum capacitance.

Maximum inputs - Magnetic phono, 500 mV at 1kHz (1.5V RMS, 10 kHz). High level inputs essentially overload proof.

Rated Outputs - 2V RMS 5Hz to 30kHz, all outputs, 60 ohm load. (Main output capability is 60V RMS output at .5% THD at 1kHz into a 500 kOhm load with 3V RMS high level input.)

Power supplies - 4 electronically-regulated solid-state supplies. Frequency-compensated high voltage supplies have a total equivalent low frequency stability of greater than 3 farads of capacitance. Line regulation better than .001%.

Tube complement - (2) 12AX7 LN, (4) 12AX7

Power Requirements - 100-120/190-240 VAC, 50/60 Hz, 35 watts.


Dimensions 19" (48 cm) W x 5 1/4" (13.4 cm) H (standard rack panel) x 10 1/4" (26 cm) D. Handles extend 1 5/8" (4.1 cm) forward of front panel. Rear chassis fittings extend 7/8" (2.3 cm).
Weight 22 lbs. (10 kg) Net, 30 lbs. (13.75 kg)










 





Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

SWAP / SALE GEAR > Electronics
SWAP / SALE GEAR
AUDIO COMPONENTS > Shop All Amplifiers > Stereo
AUDIO COMPONENTS > Shop All Amplifiers


Audiolab Banana Plugs for Speaker Cables - Gold Plated - Black/Red (1 Pair) $6.50
TIVO AG0100 Wireless-G USB Network Adapter $69.99
Chief RPAU Universal Projector Ceiling Mount $199.00
Paradigm Cinema 110CT 5.1 Speaker System $1,049.00
APC Essential A/V Surge Protector, 6 outlet $10.99
Audiolab Stereo & Home Theater

 About Us
 Privacy Policy
 Send Us Feedback
 
Company Info | Advertising | Product Index | Category Index | Help | Terms of Use
Copyright © Audiolab Stereo & Home Theater. All Rights Reserved.
Sell Online with Volusion.