The Bryston B-100 SST Integrated Amplifier is without question one of the most sonically transparent and reliable audio products available. It offers performance levels equal to the finest separate audio components.

The B100 SST is a state of the art analog stereo integrated amplifier which utilizes ‘software’ control. The software allows us to provide many more features and functions while still adhering to traditional fully discrete analog circuits throughout the amplifier circuit path.

The B-100 is available with an optional modular plug-in Moving Magnet Phono stage (B-100P) as well as an optional plug in Digital stage (B-100DA) for state of the art PCM Digital playback. Both the MM Phono and the Digital stage are available separately or combined in a single package. Modularity in design allows you to add either of these great options at a later date if required.

• Preamp Section
• Frequency response: 20Hz - 20kHz +/- .05dB
• Maximum output: 15 volts
• IM or THD: Less than 0.005% at 3 volts out
• High level sensitivity: 500mV
• Rated noise: Ref. 500mV, 20-20kHz - 100dB
• Amplifier Section
• Power: 100 watts per channel, 8 ohms; 180 watts per channel, 4 ohms
• Harmonic distortion: Less than 0.02% from 20Hz to 20kHz at 60 watts
• IM distortion: Less than 0.01% from 10 milliwatts to 60 watts
• Noise: 106 dB below full output
• Slewing rate: Greater than 60 volts per microsecond
• Power bandwidth: .5Hz to over 100kHz
• Damping factor: Over 500 at 20Hz, ref. 8 ohms
• Input sensitivity: .775 Volt in for full output 50k input impedance
• Dimensions: 19" or 17" wide, 4.5" high, 10.5" deep