The new P7 is, in our opinion, the ultimate performance turntable at it's price available to the music-loving public. We designed the P7 with knowledge and expertise gained from our legendary flagship turntable the P9.

The plinth is a complex CNC machined skeletal structure of medium lightweight fibre composite encased in highly ridged phenolic resin laminates - ultra lightweight, ultra rigid foundation for this high performance turntable. This results in the plinth being very strong and very light, which inturn improves the performance.

The main bearing assembly is engineered to extremely tight tolerances. This results in virtually friction free rumble-less performance which, if lubricated correctly, will last your lifetime!

The ceramic platter is something which we have desperately wanted to evolve from the P9 and use for other turntables, yet for a long time we have had difficulty in being able to produce such an expensive material for lower cost turntables. However, we believe this new incarnation of the ceramic platter bridges that gap!

The P7 is finished in a highly attractive Aluminium metal extrusion surround. Which offers great rigidity and through clever machining produces an extremely low mass which gives a performance improvement.

Power Supply
The all new TT PSU and motor anti-vibration circuit is a combination of the innovative P9 power supply along with an improved P25 anti-vibration motor drive feeding the P9 24V AC synchronous motor. The TT PSU uses a remote "wall wart" transformer therefore keeping the sources of hum & noise well away from sensitive parts such as the cartridge and phono leads. These attributes will enhance and control the turntables effectiveness to reproduce music.

The new RB700
The RB700 carries forward the superior RB name with huge efficiency, and lives upto the RB tonearms much awarded history. The RB700 is clearly different in many ways to the previous 600 model, some of the key areas of improvement are the bias housing, bearing assemblies and the materials used on it.

The RB700 tonearm is designed to make cartridges work harder, maximising the cantilever acceleration and travel as much as possible with the utmost accuracy within the cartridge body thus providing new levels of information.

Fitted as standard on our P5 and P7 turntables the RB700 offers exceptional performance and build quality.
The aluminium tube has been specially coated in a unique finish whilst remaining low mass. The tonearm assembly is concentrated around precision, hardened stainless steel and miniature ball races of the highest quality. The bearings fit on to ground shafts and into the tonearm using interference fits. This means that no adhesive is required and therefore none of the associated (component - adhesive - component) losses in rigidity prevail. It is fitted to the plinth by a 3-point fixing which is CNC machined out of a single solid block of Stainless steel. This provides the strongest most rigid base structure possible for the tonearm and causes less stress on the plinth and the bearing housing, and therefore the least possible resonance.
The RB700 tonearm is designed to make cartridges work harder, maximising the cantilever acceleration and travel as much as possible with the utmost accuracy within the cartridge body thus providing new levels of information.