An amplifier should be transparent, it should literally be just wire with gain. At Origin they pride themselves in offering no-compromise amplifiers to drive their loudspeakers. Whether you require a stereo or multi-channel version, their amplifiers feature high-efficiency, Class-D power that is built to last and will reproduce every nuance of every recording.
Twelve Channel, Stereo Amplifier
At 50 watts of power to each channel and 100 watts to one channel in bridged mode and the ability to consistently drive a 4-ohm load, this is a workhorse that can be used as a building block in any system. Its automation and protection circuits serve to make it perfect choice for home theater or multi-room/multi-zone applications.
This switching type amplifier class has incredible efficiency, above 90%, as higher power is demanded. This means substantially less heat is produced even though the amplifier is able to produce substantial power. This also means a reduction in size as smaller heat sinks are required and the electronic circuitry can be more compact and reside in a smaller chassis.
Bridging two channels into one drives almost triple the power into a single output. This feature creates greater flexibility in system design when additional power is a requirement.
Origin amplifiers can be place in a rack or inside furniture and require no direct access to function. They are turned on out of standby mode either by sensing the audio signal from a preamp or receiver or by a 12-volt signal from any number of components. They also have a 12-volt output to trigger other components as necessary.
Built-in circuits that sense both thermal overload or a short-circuit in the speaker connections, will shut down the amplifier until the temperature level returns to normal operating levels or the short in the connections is corrected. This protects the amplifier from permanent damage and avoids costly service visits and repairs.
- 12 Independent Channels
- Global & Individual Inputs
- 50 Watts of Class-D Power per Channel
- Bridgeable Outputs
- Signal Sensing Turn-On
- 12 Volt Trigger
- Thermal Protection
- Short Circuit Protection
- 2U Rack Mountable
- Mounting Plates Included