Image 1

Parasound HINT 6 Integrated Amplifier

×
Price:
$2,995.00
SKU:
PARHINT6-P
Condition:
New


In Store Only




We Take Trade-Ins. Request Trade-In Value Here.
Description
Specifications
Reviews
Related Products
Product Videos
Warranty
Also Viewed
  • Product Description

    New Features (Changes from the original Halo Integrated)
    • Burr Brown analog resistor ladder volume control
    • Dimmable front panel volume display
    • Updated USB receiver is Plug and play with Windows 10 and MAC
    • An additional optical input (2 total)
    • Ball bearing supported solid aluminum volume knob
    • Programmable default turn on volume setting
    • Favorite volume memory with remote control button
    • Increased phono stage gain for lower output cartridges
    • Improved Left/Right channel separation and balance tracking
    • Updated cosmetics with subtle gold highlights


    Preamp and DAC Features:
    • ESS Sabre32 Reference DAC (ES9018K2M)
    • Asynchronous USB 2.0 supports PCM up to 384kHz/32-bit
    • USB input decodes Native DSD64, DSD128, DSD256 and DoP DSD
    • Coax and optical inputs accept PCM up to 192kHz/24-bit
    • Analog bass management with high & low pass crossovers
    • Home theater bypass input for surround sound integration
    • Front panel subwoofer level control
    • Dedicated high current headphone amplifier (TI TPA6120)
    • Phono input for MM, MC and MI with 100 Ω or 47k Ω load
    • Front panel Aux input with automatic +12 dB gain stage
    • 5 pairs RCA line level Analog inputs
    • 1 pair XLR balanced Analog input
    • Balanced XLR and RCA left and right preamp outputs
    • 1 balanced XLR and 2 RCA subwoofer outputs
    • Bass & treble controls with relay bypass from remote or front panel
    • Rear panel IR input and IR loop output jacks
    • 12 Volt trigger output
    • Back-lit remote control with discrete buttons
    • 0.5w standby power consumption meets Energy Star & EU specs


    Power Amp Features:
    • 160 Watts x 2 @ 8 Ohms (RMS, both channels driven)
    • 240 Watts x 2 @ 4 Ohms (RMS, both channels driven)
    • Power amp circuit topology designed by legendary John Curl
    • Direct amplifier input to bypass preamp section
    • High bias class A/AB operation
    • Oversized shielded toroid power transformer
    • Dual-mono power supply and power amplifier
    • 40,000uF power supply filter capacitance
    • Matched JFET input stages and MOSFET driver stages
    • 12 high voltage/high current bipolar output transistors
    • Heavy-duty 24k gold-plated 5-way speaker binding posts
    • Over temp and short circuit relay protection

    Specs:

    • Power Output - Both channels driven (0.9% THD, 20 Hz - 20 kHz)
    • 180 watts x 2 @ 8 Ω RMS
    • 270 watts x 2 @ 4 Ω RMS
    • Current Capacity
    • 45 amps peak per channel
    • Frequency Response
    • 10 Hz - 100 kHz, +0/-3 dB
    • 20 Hz - 20 kHz, +0/-0.5 dB
    • Total Harmonic Distortion (THD)
    • < 0.01 %, average listening levels
    • < 0.05 %, 160 watts x 2 @ 8 Ω
    • Interchannel Crosstalk
    • > 70 dB at 20 kHz
    • > 78 dB at 1 kHz
    • Signal to Noise Ratio - IHF A-weighted
    • Line in: - 103 dB (input shorted)
    • Digital in: - 106 dB
    • Amplifier Damping Factor
    • > 800 at 20 Hz
    • Preamplifier Stage Input Sensitivity
    • 300 mV in for 1 V at Preamp Output jacks
    • Total Preamp Stage Gain: 10 dB
    • Max Output Unbalanced: 7 V
    • Max Output Balanced: 9 V
    • Power Amplifier Stage Sensitivity
    • 1 V at Bypass/Amp In for 28 V at Speaker Out
    • Total Amp Stage Gain: 28 dB
    • Phono Stage Sensitivity / Input Impedance
    • MM: 41 dB / 47 k Ω
    • MC: 54 dB / 47 k Ω or 100 Ω
    • High & Low Pass Crossover Slope
    • 12 dB per octave
    • Supported DAC Sampling Rates
    • USB: up to 384 kHz / 32-bit PCM
    • DSD Native: DSD 64, DSD 128, DSD 256
    • DSD over PCM (DoP) at 384 kHz
    • Coax/Optical
    • Up to 192 kHz / 24-bit PCM
    • Digital to Analog Converter
    • ESS Sabre32 Reference ES9018K2M
    • 384 kHz / 32-bit
    • USB 2.0 Controller
    • Savitech SA9227, 384 kHz / 32-bit
    • Headphone Amplifier
    • Texas Instruments TPA6120A
    • Output Impedance 10 ohms
    • XLR Pin Identification
    • 1 = Ground (Shield)
    • 2 = Positive
    • 3 = Negative (Return)
    • Input Impedance
    • Unbalanced: 24 k Ω
    • Balanced: 100 k Ω per leg
    • Preamplifer Output Impedance
    • Unbalanced: 100 Ω
    • Balanced: 470 Ω per leg
    • Dimensions
    • Width: 17-1/4" (437 mm)
    • Depth: 16-1/4" (413 mm)
    • Depth, with cables 17-1/4" (437 mm)
    • Height, with feet: 5-7/8" (150 mm)
    • Height, without feet: 5-1/4" (133 mm), 3U
    • Net Weight
    • 33 lb. (15 kg)
    • Shipping Weight
    • 45 lb. (20.4 kg)
    • Power Requirement
    • Standby: 0.5 watts
    • Idling power: 70 watts
    • Maximum: 750 watts
    • 110-125 VAC 60 Hz or 220-250 VAC 50 H
    • AC mains voltage is set on rear panel
  • Product Reviews

    ×

    This product hasn't received any reviews yet. Be the first to review this product!

    Write A Review

  • Find Similar Products by Category

×
×