The new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable. It comes with a smooth running belt drive and an aluminum platter with rubber mat. The new Thorens TP 71 tonearm uses a detachable headshell with preconfigured AT 3600 cartridge.
Special Features:
- Using the switchable integrated phono stage the TD 201 can be connected to any amplifier or receiver even if it does not have a specific input for phono devices
Technical Specifications
- Turntable section
- Drive system: Belt Drive
- Motor: DC Motor
- Speeds: 33 1/3 RPM, 45 RPM
- Rotation Speed Variation: +/–2%
- Wow and Flutter: 0.2%
- Signal-to-Noise Ratio: 67dB or higher (A-weighted, 20kHz LPF), 60dB or higher (unweighted, 20kHz LPF)
- Platter: Aluminum Die-cast
- Diameter of Platter: 12", 300mm
- Tonearm section
- Type: Static Balance, Straight
- Effective Arm Length: 8.8", 223.6mm
- Stylus Pressure Range: 0 to 4g
- Supported Cartridge Weight: 3.5 to 6.0g
- Overhang: 18.6mm
- Anti-skating Adjustment: Supported
- Cartridge section
- Type: MM type (Audio-Technica AT3600)
- Stylus Construction: Bonded Diamond
- Frequency Response: 20Hz to 20kHz
- Channel Separation: >18dB
- Channel Balance: 2.5dB
- Vertical Tracking Angle: 20 degrees
- Supported Load Impedance: 47k ohms
- Output Voltage: 2.5mV (1kHz, 3.54cm/sec.)
- Stylus Pressure: 3.5g +/–0.5g
- Cartridge Weight: 5g +/–0.5g
- Head-shell Weight: 10g (including Screws, Nuts and Wires)
- Analog Output
- Connector: RCA Pin jack (Gold-plated)
- Power: AC 100 to 240V, 50/60Hz
- Power Consumption: 1.5W (less than 0.5W at Standby)
- Overall Dimensions (W x H x D): 420 x 355x 121mm
- Weight: Approx. 3.9 kg
- Line/Type:
- Turntables
