Image 1

NAD C 275BEE Stereo Power Amplifier

In-stock - Ships same day M-F if ordered by 3:00 pm EST., otherwise ships next business day.
We Take Trade-Ins. Request Trade-In Value Here.
Related Products
Product Videos
Also Viewed
  • Product Description

    NAD Products Can Only Be Purchased From And Shipped To Addresses In The United States

    When it comes to an NAD product, the utmost attention to detail is paid, which can be clearly seen in the likes of the C 275BEE. From the heavy gauge steel chassis to the advanced power supplies and copper buss bars, the C 275BEE represents all that NAD stands for. Equipped with NAD’s ATOLogic circuit, which includes both a 12V-trigger system and signal-sensing power-on option, this extra level of flexibility makes it easy to integrate the C 275BEE into any control system. The C 275BEE also benefits from NAD’s proprietary PowerDrive™ circuit topology, which allows the C 275BEE to deliver maximum performance under various circumstances, to even the most powerful of speakers. Delivering a well-rounded, mesmerizing performance, the C 275BEE will let you hear your music the way it was meant to be heard.

    Tons of Power for Every Situation
    The C 275BEE boasts many upgrades and refinements taken directly from the highly acclaimed NAD Masters Series M3 Amplifier. These include application of Bjorn Erik Edvardsen’s innovative and patented Distortion Canceling Circuit in the output stage and BEE Clamp in the power supply. A carefully engineered PCB layout has reduced distortion and noise to unprecedented levels. Taken together, these improvements mark a sharp upturn in performance that simply must be heard, to be fully appreciated!


    • 2 x 150W Continuous Power into 4 ohms and 8 ohms
    • 250W, 410W, 600W IHF Dynamic power into 8, 4 and 2 ohms, respectively
    • PowerDrive™ circuit
    • Holmgren Toroidal Power transformer
    • All discrete circuitry
    • Class A Voltage Stages
    • Distortion Canceling Circuit
    • BEE Anti-saturation Clamp
    • Short signal path from input to output
    • All sockets Gold plated
    • Soft Clipping™
    • ATOLogic 12 volt trigger/ signal sensing input
    • Detachable IEC Power Cable
    • <1W Standby Power Consumption
    • Free of lead and other environmentally dangerous substances
  • Product Reviews


    Write A Review

    1. NAD 275

      This power amp lives up to the reviews I read about it. I won't be looking for another amp soon. If I do, it'll be an NAD. on Sep 11th 2018

  • Find Similar Products by Category

  • Other Details

    Continuous output power into 8Ω and 4Ω (both channels driven) 150W (ref. rated THD, 20Hz – 20kHz)
    Continuous output power into 8Ω (Mono, Bridge mode) 330W (ref. 20Hz – 20kHz, (Mono, Bridge mode) <0.02% THD)
    Rated THD (250mW to rated power, CCIF IMD, DIM 100) 0.008% (ref. 20Hz – 20kHz)
    Clipping power (4Ω and 8Ω) 170W (ref. 1kHz 1% THD)
    IHF dynamic power 8Ω 250W
    IHF dynamic power (Bridge mode) 8Ω 800W
    Peak output current 50A (ref. 1Ω, 1ms)
    Signal/Noise ratio 102dB (A-weighted, ref. 1W)
    123dB (A-weighted, ref. 150W)
    Damping factor 180 (ref. 8Ω, 50Hz and 1kHz)
    Frequency response ± 0.1dB (ref. 20Hz – 20kHz)
    3Hz – 100kHz (ref. -3dB)
    Input impedance (Fixed IN) 10kΩ + 200pF
    Input impedance (Variable IN) 100kΩ + 100pF
    Input Sensitivity 1.2V (ref. rated power)
    Voltage gain 29dB
    Minimum input level for AUTO TRIGGER 10mV at 1kHz
    Time to power OFF at no signal in AUTO mode 10 minutes
    Normal operation 312W (ref. 230V AC 50Hz; 120V AC 60Hz)
    Standby power 1W
    Idle power 100W
    Dimensions (WxHxD) 17 1/8” x 5 1/4” x 13 3/4”
    Weight 32.2 lbs.
    Line/Type Stereo Power Amplifiers